|
Undercut-
Anchors Structural Glass |
|
|
|
The development of the Germany fisher, from
marbles to ceramics and then to glass,completely revolutionized fixing techniques. |
|
|
Globally
advanced Germany FZP-G structural glass system¡G |
|
- small,
discreet fixing point O20mm.
- no penetration of the glass panel .
- The volume of elaborate holder is one forth less to those of ordinaries.
- Go with circumstance protection idea, the least resources product
largest effects .
- Fixing holder is aluminum alloy and its color could go with its
matches.
- Fixing holder is flexible to absorb the movement .
- Setting easily, unnecessary special skill, and minimum working hours.
- Mechanical fixing is firm and reliable.
|
|
|
|
|
Advantages
of FZP- undercut- anchors in glass |
Mechanical Fixing |
|
|
|
|
|
Undercut
hold |
No expansion
forces in the glass panel |
|
|
|
|
|
Reaction
forces in the material only if outer forces are applied to the anchor |
Laminated safety glass |
|
|
Edge
distance ¡Ù50mm, tightening torque 6 Nm |
|
|
Glass thickness 08mm,
anchorage depth 5 mm
Glass thickness 10mm, anchorage depth 6 mm
Glass thickness 12mm, anchorage depth 7 mm |
|
|
|
Insulating
glass- point fixing FZP- G IS |
- small, discreet fixing
point O26mm.
- no penetration of the glass panel.
- no contact between stainless steel A4 of
- anchor and glass panel.
- best optical quality of facade.
- enormous scopes for architectural design.
- no exposure of metal components, no
- problems of oxides and dirts.
|
|
|
|
|
|
The
ACT- System for glass offers |
|
- Without penetration, without sealing
problems, small thermal bridge losses, no danger of dirt accumulation
on panel surface.
- Optimal coordinated parts made of high quality materials.
- Automatic drilling system.
- Design and test support.
|
|
|
|
|
Fixing
of glass panels with system one- Star Solution |
|
features of star solution
- Adjust-able in vertical and horizontal .
- Undertake the thermal expansion.
- Fit for variety of shapes.
- Shortened working hours by every holder's independence and flexibility.
- forth of ordinaries, the fixing holder, goes with environment protection
idea .
- Various color to choose, and able to custom-make.
|
|
|
|
|
|
The
ACT- System for glass offers |
|
- (Pullout
test¡A¡í145mm)
results : 10mm Tempered Glass~
4KN
12mm Tempered Glass~ 4.5KN
- (Centrical
pressure test¡í145mm)
results :10mm Tempered Glass~
12KN
12mm Tempered Glass ~14KN
- (Motion
Test 10,000 cycles¡B3Hz¡AF=100 to 700N )
Prior to Pulling Test
results : 10mm Tempered Glass~
4KN
12mm Tempered Glass~ 4.4KN
- Motion Test with four supporting
points
Cycles:
100,000 cycles¡B3Hz¡AF=700 to 2200N
100,000 cycles¡B3Hz¡AF=1100 to4750N
Result: No breakage
- cutting test
Results :Support weight up
to 6.5KN
- Specification
of 1.8M x 1.8M with FZP-G 4-point supporting, hole to edge:50mm,
stress up to:2.5KN/M2
Strain status:
10 cycles0.5KN¡B1KN¡B1.5KN¡B2KN¡B2.5KN
Results :
The bow in central up to 48mm for 10mm tempered glass under 2.5KN.
The bow in central up to 65mm for 10mm tempered glass under 2.5KN.
|
|
|
|
|
|
|
|